Type of mechanical arm with similar functions to a human arm
A robotic arm is a type of
mechanical arm, usually
programmable, with similar functions to a human
arm; the arm may be the sum total of the mechanism or may be part of a more complex
robot. The links of such a manipulator are connected by joints allowing either rotational motion (such as in an
articulated robot) or translational (linear) displacement. The links of the manipulator can be considered to form a
kinematic chain. The terminus of the kinematic chain of the manipulator is called the
end effector and it is analogous to the human
hand. However, the term "robotic hand" as a synonym of the robotic arm is often
Cartesian robot / Gantry robot: Used for
pick and place work, application of sealant, assembly operations, handling machine tools and arc welding. It is a robot whose arm has three prismatic joints, whose axes are coincident with a Cartesian coordinator.
collaborative robot / Cobot: Cobot applications contrast with traditional industrial robot applications in which robots are isolated from human contact. Cobot has a large variety of
applications such as: Commercial Application, Robotic Research, Dispensing, Material Handling, Assembly, Finishing, Quality Inspection. Cobot safety may rely on lightweight construction materials, rounded edges, and the inherent limitation of speed and force, or on sensors and software that ensures safe behavior.
Cylindrical robot: Used for assembly operations, handling at machine tools, spot welding, and handling at die casting machines. It is a robot whose axes form a cylindrical coordinate system.
Spherical robot / Polar robot: Used for handling machine tools, spot welding, die casting, fettling machines, gas welding and arc welding. It is a robot whose axes form a polar coordinate system.
SCARA robot: Used for pick and place work, application of sealant, assembly operations and handling machine tools. This robot features two parallel rotary joints to provide compliance in a plane.
Articulated robot: Used for assembly operations, diecasting, fettling machines, gas welding, arc welding and spray-painting. It is a robot whose arm has at least three rotary joints.
Parallel robot: One use is a mobile platform handling cockpit flight simulators. It is a robot whose arms have concurrent prismatic or rotary joints.
Anthropomorphic robot: It is shaped in a way that resembles a human hand, i.e. with independent fingers and thumbs.
TAGSAM is a robotic arm for collecting a sample from a small asteroid in space on the spacecraft
The 2018 Mars lander
InSight has a robotic arm called the IDA, it has camera, grappler, is used to move special instruments.
Low-cost robotic arms
In the decade of 2010 the availability of low-cost robotic arms increased substantially. Although such robotic arms are mostly marketed as hobby or educational devices, applications in
laboratory automation have been proposed, like their use as
serial robot arm can be described as a chain of links that are moved by joints which are actuated by motors. An
end-effector, also called a robot hand, can be attached to the end of the chain. As other robotic mechanisms, robot arms are typically classified in terms of the number of
degrees of freedom. Usually, the number of degrees of freedom is equal to the number of joints that move the links of the robot arm. At least six degrees of freedom are required to enable the robot hand to reach an arbitrary pose (position and orientation) in three dimensional space. Additional degrees of freedom allow to change the configuration of some link on the arm (e.g., elbow up/down), while keeping the robot hand in the same pose.
Inverse kinematics is the mathematical process to calculate the configuration of an arm, typically in terms of joint angles, given a desired pose of the robot hand in three dimensional space.
The end effector, or robotic hand, can be designed to perform any desired task such as welding, gripping, spinning etc., depending on the application. For example, robot arms in
automotiveassembly lines perform a variety of tasks such as
welding and parts rotation and placement during assembly. In some circumstances, close emulation of the human hand is desired, as in robots designed to conduct
bomb disarmament and disposal.