Elementary algebra encompasses the basic concepts of algebra. It is often contrasted with arithmetic: arithmetic deals with specified numbers,^{ [1]} whilst algebra introduces variables (quantities without fixed values).^{ [2]}
This use of variables entails use of algebraic notation and an understanding of the general rules of the operations introduced in arithmetic. Unlike abstract algebra, elementary algebra is not concerned with algebraic structures outside the realm of real and complex numbers.
It is typically taught to secondary school students and builds on their understanding of arithmetic. The use of variables to denote quantities allows general relationships between quantities to be formally and concisely expressed, and thus enables solving a broader scope of problems. Many quantitative relationships in science and mathematics are expressed as algebraic equations.
Algebraic notation describes the rules and conventions for writing mathematical expressions, as well as the terminology used for talking about parts of expressions. For example, the expression has the following components:
A coefficient is a numerical value, or letter representing a numerical constant, that multiplies a variable (the operator is omitted). A term is an addend or a summand, a group of coefficients, variables, constants and exponents that may be separated from the other terms by the plus and minus operators.^{ [3]} Letters represent variables and constants. By convention, letters at the beginning of the alphabet (e.g. ) are typically used to represent constants, and those toward the end of the alphabet (e.g. and z) are used to represent variables.^{ [4]} They are usually printed in italics.^{ [5]}
Algebraic operations work in the same way as arithmetic operations,^{ [6]} such as addition, subtraction, multiplication, division and exponentiation.^{ [7]} and are applied to algebraic variables and terms. Multiplication symbols are usually omitted, and implied when there is no space between two variables or terms, or when a coefficient is used. For example, is written as , and may be written .^{ [8]}
Usually terms with the highest power ( exponent), are written on the left, for example, is written to the left of x. When a coefficient is one, it is usually omitted (e.g. is written ).^{ [9]} Likewise when the exponent (power) is one, (e.g. is written ).^{ [10]} When the exponent is zero, the result is always 1 (e.g. is always rewritten to 1).^{ [11]} However , being undefined, should not appear in an expression, and care should be taken in simplifying expressions in which variables may appear in exponents.
Other types of notation are used in algebraic expressions when the required formatting is not available, or can not be implied, such as where only letters and symbols are available. As an illustration of this, while exponents are usually formatted using superscripts, e.g., , in plain text, and in the TeX mark-up language, the caret symbol ^ represents exponentiation, so is written as "x^2".,^{ [12]}^{ [13]} as well as some programming languages such as Lua. In programming languages such as Ada,^{ [14]} Fortran,^{ [15]} Perl,^{ [16]} Python^{ [17]} and Ruby,^{ [18]} a double asterisk is used, so is written as "x**2". Many programming languages and calculators use a single asterisk to represent the multiplication symbol,^{ [19]} and it must be explicitly used, for example, is written "3*x".
Elementary algebra builds on and extends arithmetic^{ [20]} by introducing letters called variables to represent general (non-specified) numbers. This is useful for several reasons.
Algebraic expressions may be evaluated and simplified, based on the basic properties of arithmetic operations ( addition, subtraction, multiplication, division and exponentiation). For example,
An equation states that two expressions are equal using the symbol for equality, = (the equals sign).^{ [26]} One of the best-known equations describes Pythagoras' law relating the length of the sides of a right angle triangle:^{ [27]}
This equation states that , representing the square of the length of the side that is the hypotenuse, the side opposite the right angle, is equal to the sum (addition) of the squares of the other two sides whose lengths are represented by a and b.
An equation is the claim that two expressions have the same value and are equal. Some equations are true for all values of the involved variables (such as ); such equations are called identities. Conditional equations are true for only some values of the involved variables, e.g. is true only for and . The values of the variables which make the equation true are the solutions of the equation and can be found through equation solving.
Another type of equation is inequality. Inequalities are used to show that one side of the equation is greater, or less, than the other. The symbols used for this are: where represents 'greater than', and where represents 'less than'. Just like standard equality equations, numbers can be added, subtracted, multiplied or divided. The only exception is that when multiplying or dividing by a negative number, the inequality symbol must be flipped.
By definition, equality is an equivalence relation, meaning it has the properties (a) reflexive (i.e. ), (b) symmetric (i.e. if then ) (c) transitive (i.e. if and then ).^{ [28]} It also satisfies the important property that if two symbols are used for equal things, then one symbol can be substituted for the other in any true statement about the first and the statement will remain true. This implies the following properties:
The relations less than and greater than have the property of transitivity:^{ [29]}
By reversing the inequation, and can be swapped,^{ [31]} for example:
Substitution is replacing the terms in an expression to create a new expression. Substituting 3 for a in the expression a*5 makes a new expression 3*5 with meaning 15. Substituting the terms of a statement makes a new statement. When the original statement is true independently of the values of the terms, the statement created by substitutions is also true. Hence, definitions can be made in symbolic terms and interpreted through substitution: if is meant as the definition of as the product of a with itself, substituting 3 for a informs the reader of this statement that means 3 × 3 = 9. Often it's not known whether the statement is true independently of the values of the terms. And, substitution allows one to derive restrictions on the possible values, or show what conditions the statement holds under. For example, taking the statement x + 1 = 0, if x is substituted with 1, this implies 1 + 1 = 2 = 0, which is false, which implies that if x + 1 = 0 then x cannot be 1.
If x and y are integers, rationals, or real numbers, then xy = 0 implies x = 0 or y = 0. Consider abc = 0. Then, substituting a for x and bc for y, we learn a = 0 or bc = 0. Then we can substitute again, letting x = b and y = c, to show that if bc = 0 then b = 0 or c = 0. Therefore, if abc = 0, then a = 0 or (b = 0 or c = 0), so abc = 0 implies a = 0 or b = 0 or c = 0.
If the original fact were stated as "ab = 0 implies a = 0 or b = 0", then when saying "consider abc = 0," we would have a conflict of terms when substituting. Yet the above logic is still valid to show that if abc = 0 then a = 0 or b = 0 or c = 0 if, instead of letting a = a and b = bc, one substitutes a for a and b for bc (and with bc = 0, substituting b for a and c for b). This shows that substituting for the terms in a statement isn't always the same as letting the terms from the statement equal the substituted terms. In this situation it's clear that if we substitute an expression a into the a term of the original equation, the a substituted does not refer to the a in the statement "ab = 0 implies a = 0 or b = 0."
The following sections lay out examples of some of the types of algebraic equations that may be encountered.
Linear equations are so-called, because when they are plotted, they describe a straight line. The simplest equations to solve are linear equations that have only one variable. They contain only constant numbers and a single variable without an exponent. As an example, consider:
To solve this kind of equation, the technique is add, subtract, multiply, or divide both sides of the equation by the same number in order to isolate the variable on one side of the equation. Once the variable is isolated, the other side of the equation is the value of the variable.^{ [32]} This problem and its solution are as follows:
1. Equation to solve: | |
2. Subtract 4 from both sides: | |
3. This simplifies to: | |
4. Divide both sides by 2: | |
5. This simplifies to the solution: |
In words: the child is 4 years old.
The general form of a linear equation with one variable, can be written as:
Following the same procedure (i.e. subtract b from both sides, and then divide by a), the general solution is given by
A linear equation with two variables has many (i.e. an infinite number of) solutions.^{ [33]} For example:
That cannot be worked out by itself. If the son's age was made known, then there would no longer be two unknowns (variables). The problem then becomes a linear equation with just one variable, that can be solved as described above.
To solve a linear equation with two variables (unknowns), requires two related equations. For example, if it was also revealed that:
Now there are two related linear equations, each with two unknowns, which enables the production of a linear equation with just one variable, by subtracting one from the other (called the elimination method):^{ [34]}
In other words, the son is aged 12, and since the father 22 years older, he must be 34. In 10 years, the son will be 22, and the father will be twice his age, 44. This problem is illustrated on the associated plot of the equations.
For other ways to solve this kind of equations, see below, System of linear equations.
A quadratic equation is one which includes a term with an exponent of 2, for example, ,^{ [35]} and no term with higher exponent. The name derives from the Latin quadrus, meaning square.^{ [36]} In general, a quadratic equation can be expressed in the form ,^{ [37]} where a is not zero (if it were zero, then the equation would not be quadratic but linear). Because of this a quadratic equation must contain the term , which is known as the quadratic term. Hence , and so we may divide by a and rearrange the equation into the standard form
where and . Solving this, by a process known as completing the square, leads to the quadratic formula
where the symbol "±" indicates that both
are solutions of the quadratic equation.
Quadratic equations can also be solved using factorization (the reverse process of which is expansion, but for two linear terms is sometimes denoted foiling). As an example of factoring:
which is the same thing as
It follows from the zero-product property that either or are the solutions, since precisely one of the factors must be equal to zero. All quadratic equations will have two solutions in the complex number system, but need not have any in the real number system. For example,
has no real number solution since no real number squared equals −1. Sometimes a quadratic equation has a root of multiplicity 2, such as:
For this equation, −1 is a root of multiplicity 2. This means −1 appears twice, since the equation can be rewritten in factored form as
All quadratic equations have exactly two solutions in complex numbers (but they may be equal to each other), a category that includes real numbers, imaginary numbers, and sums of real and imaginary numbers. Complex numbers first arise in the teaching of quadratic equations and the quadratic formula. For example, the quadratic equation
has solutions
Since is not any real number, both of these solutions for x are complex numbers.
An exponential equation is one which has the form for ,^{ [38]} which has solution
when . Elementary algebraic techniques are used to rewrite a given equation in the above way before arriving at the solution. For example, if
then, by subtracting 1 from both sides of the equation, and then dividing both sides by 3 we obtain
whence
or
A logarithmic equation is an equation of the form for , which has solution
For example, if
then, by adding 2 to both sides of the equation, followed by dividing both sides by 4, we get
whence
from which we obtain
A radical equation is one that includes a radical sign, which includes square roots, cube roots, , and nth roots, . Recall that an nth root can be rewritten in exponential format, so that is equivalent to . Combined with regular exponents (powers), then (the square root of x cubed), can be rewritten as .^{ [39]} So a common form of a radical equation is (equivalent to ) where m and n are integers. It has real solution(s):
n is odd | n is even and |
n and m are even and |
n is even, m is odd, and |
---|---|---|---|
equivalently |
equivalently |
no real solution |
For example, if:
then
and thus
There are different methods to solve a system of linear equations with two variables.
An example of solving a system of linear equations is by using the elimination method:
Multiplying the terms in the second equation by 2:
Adding the two equations together to get:
which simplifies to
Since the fact that is known, it is then possible to deduce that by either of the original two equations (by using 2 instead of x ) The full solution to this problem is then
This is not the only way to solve this specific system; y could have been resolved before x.
Another way of solving the same system of linear equations is by substitution.
An equivalent for y can be deduced by using one of the two equations. Using the second equation:
Subtracting from each side of the equation:
and multiplying by −1:
Using this y value in the first equation in the original system:
Adding 2 on each side of the equation:
which simplifies to
Using this value in one of the equations, the same solution as in the previous method is obtained.
This is not the only way to solve this specific system; in this case as well, y could have been solved before x.
In the above example, a solution exists. However, there are also systems of equations which do not have any solution. Such a system is called inconsistent. An obvious example is
As 0≠2, the second equation in the system has no solution. Therefore, the system has no solution. However, not all inconsistent systems are recognized at first sight. As an example, consider the system
Multiplying by 2 both sides of the second equation, and adding it to the first one results in
which clearly has no solution.
There are also systems which have infinitely many solutions, in contrast to a system with a unique solution (meaning, a unique pair of values for x and y) For example:
Isolating y in the second equation:
And using this value in the first equation in the system:
The equality is true, but it does not provide a value for x. Indeed, one can easily verify (by just filling in some values of x) that for any x there is a solution as long as . There is an infinite number of solutions for this system.
Systems with more variables than the number of linear equations are called underdetermined. Such a system, if it has any solutions, does not have a unique one but rather an infinitude of them. An example of such a system is
When trying to solve it, one is led to express some variables as functions of the other ones if any solutions exist, but cannot express all solutions numerically because there are an infinite number of them if there are any.
A system with a higher number of equations than variables is called overdetermined. If an overdetermined system has any solutions, necessarily some equations are linear combinations of the others.