A whippletree, or whiffletree,  is a mechanism to distribute force evenly through linkages. It is also referred to as an equalizer, leader bar, or double tree. It consists of a bar pivoted at or near the centre, with force applied from one direction to the pivot and from the other direction to the tips. Several whippletrees may be used in series to distribute the force further, such as to simulate pressure over an area as when applying loading to test airplane wings. Whippletrees may be used either in compression or tension. They were also used for subtraction and addition calculations in mechanical computers. Tension whippletrees are used in artful hung mobiles, such as those by artist Alexander Calder.
Whippletrees are used in tension to distribute forces from a point load to the traces of draught animals (the traces are the chains or straps on each side of the harness, on which the animal pulls). For these, the whippletree consists of a loose horizontal bar between the draught animal and its load. The centre of the bar is connected to the load, and the traces attach to its ends. Whippletrees are used especially when pulling a dragged load such as a plough, harrow, log or canal boat or for pulling a vehicle (by the leaders in a team with more than one row of animals).
A whippletree balances the pull from each side of the animal, preventing the load from tugging alternately on each side. It also keeps a point load from pulling the traces in onto the sides of the animal.
If several animals are used abreast, further whippletrees may be used behind the first. Thus, with two animals, each has its own whippletree, and a further one balances the loads from their two whippletrees—an arrangement sometimes known as a double-tree, or for the leaders in a larger team, leader-bars. With three or more animals abreast, even more whippletrees are needed; some may be made asymmetrical to balance odd numbers of animals. Multiple whippletrees balance the pulls from the different animals, ensuring that each takes an equal share of the work.
Whippletrees are also used in modern agriculture—for example, to link several ganged agricultural implements such as harrows, mowers or rollers to a tractor. This combines several small loads into a single load at the tractor hitch (the reverse of the use for draught animals).
A series of whippletrees is used in compression in a standard windshield wiper to distribute the point force of the sprung wiper arm evenly along the wiper blade.
Some designs for large telescopes use whippletrees  to support the optical elements. The tree provides distributed mechanical support, reducing localised mechanical deflections, which in turn reduces optical distortion.  Unlike the applications described above, which are two-dimensional, the whippletrees in telescope mirror support cells are three-dimensional designs,  since the tree must support multiple points over an area.
Linkage-type mechanical analog computers use whippletree linkages to add and subtract quantities represented by straight-line motions.  The illustration here of whippletrees for a three-animal team is very similar to a group of linkage adders and subtracters: "load" is the equivalent of the output sum/difference of the individual inputs. Inside the computer, cylinders on the knob shafts have thin metal tapes wrapped around them to convert rotary to linear motion.
One widely used application was in the IBM Selectric typewriter (and the IBM 2741 derived from it), where the linkages summed binary mechanical inputs to rotate and tilt the type ball. This type of computing method was also used for naval gunnery, such as the MK 56 Gun Fire Control System and sonar fire-control systems.
- Boat trailer, which uses this mechanism to evenly distribute force across the hull of the boats it carries.
- Differential (mechanical device), which does for torque what each layer of a whippletree does for force.
- Draught animal
- Draught horse
- Gresley conjugated valve gear
- Horse collar
- Horse harness
- Mobile (sculpture), similar principles applied in art.
- Paraglider wing, in which a load is distributed by multiple strings, but without rigid elements.
- PLate OPtimizer, CAD program for distribution of whippletree support elements in telescope mirror cell design
- Proteus (WAM-V), catamaran with whippletree suspension
- Rocker-bogie, the whippletree applied to Mars rover suspension.
- Whiffletree definition – see regional note.
- A Short History of Armagh Observatory.
- see photo of first mirror cell to use whippletree levers.
- Mechanical design of the 110 cm Cruxis Telescope Mirror and mirror support cell.
- Svoboda, Antonín, Computing Mechanisms and Linkages, M.I.T. Radiation Laboratory Series, New York, 1948, McGraw-Hill Book Company (also New York, Dover Publications, 1965) Section 2-6, Fig 2-12, p 37.
- Photo of whippletree for draught horses by Beig Alert on Flickr (Note: this photo shows three muddled sets of whippletrees: one single, one double and one triple.)
- Photo InTheHead of a windshield wiper's whippletree by Barefoot on Flickr
- Major telescopes from Lord Rosse to about 1980
- Support of PILOT primary mirror by Peter Gillingham 2 March 2007
- Mirror Edge Support Calculator
- Images of mechanical computer.