Juno I Article

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search
Juno I
Juno-1 explorer-2.jpg
Juno I satellite launch vehicle carrying Explorer 2. (USAF)
FunctionOrbital launch vehicle
Manufacturer Chrysler for the ABMA
Country of originUnited States
Size
Height21.2 m (70 ft)
Diameter1.78 m (5 ft 10 in)
Mass29,060 kg (64,070 lb)
Stages4
Capacity
Payload to LEO11 kg (24 lb)
Launch history
StatusRetired
Launch sites LC-5 and 26A, Cape Canaveral Missile Annex, Florida
Total launches6
Successes3
Failures3
First flightJanuary 31, 1958
(First orbit: Explorer 1 January 31, 1958)
Last flightOctober 23, 1959
First stage - Redstone (stretched)
Engines1x Rocketdyne A-7
Thrust42,439 kgf (416.18 kN; 93,560 lbf)
Specific impulse235 sec
Burn time155 seconds
Fuel Hydyne/ LOX
Second stage Baby Sergeant cluster
Engines11 Solid
Thrust7,480 kgf (73.4 kN; 16,500 lbf)
Specific impulse214 sec
Burn time6 seconds
Fuel Solid - polysulfide-aluminum and ammonium perchlorate
Third stage - Baby Sergeant cluster
Engines3 Solid
Thrust2,040 kgf (20.0 kN; 4,500 lbf)
Specific impulse214 sec
Burn time6 seconds
Fuel Solid - polysulfide-aluminum and ammonium perchlorate
Fourth stage - Baby Sergeant
Engines1 Solid
Thrust680 kgf (6.7 kN; 1,500 lbf)
Specific impulse214 sec
Burn time6 seconds
Fuel Solid - polysulfide-aluminum and ammonium perchlorate

The Juno I was a four-stage American booster rocket which launched America's first satellite, Explorer 1, in 1958. A member of the Redstone rocket family, it was derived from the Jupiter-C sounding rocket. It is commonly confused with the Juno II launch vehicle, which was derived from the PGM-19 Jupiter medium-range ballistic missile.

Development

The Juno I consisted of a Jupiter-C rocket with a fourth stage mounted on top of the "tub" of the third stage, and fired after third-stage burnout to boost the payload and fourth stage to an orbital velocity of 8 kilometres per second (29,000 km/h; 18,000 mph). The tub along with the fourth stage were set spinning while the rocket was on the launch pad to provide gyroscopic force in lieu of a guidance system that would have required vanes, gimbals, or vernier motors. This multi-stage system, designed by Wernher von Braun in 1956 for his proposed Project Orbiter, obviated the need for a guidance system in the upper stages. It was the simplest method for putting a payload into orbit but having no upper-stage guidance, the payload could not achieve a precise orbit. Both the four-stage Juno I and three-stage Jupiter-C launch vehicles were the same height (21.2 meters), with the added fourth-stage booster of the Juno I being enclosed inside the nose cone of the third stage.

The rocket family is named for the Roman goddess and queen of the gods Juno for its position as the satellite-launching version of the Jupiter-C. The name was proposed by JPL Director Dr. William Pickering in November 1957. The September 1956 test launch of a Jupiter-C for the Army Ballistic Missile Agency could have been the world's first satellite launch. Had a fourth stage been loaded and fueled, the nose cone would have overshot the target and entered orbit. Such a launch did not occur until early 1958 when a Juno 1 successfully launched the first United States satellite, Explorer 1, as part of Project Vanguard, after the Soviet Union's Sputnik 1 in October 1957. [1]

Launch history

Although Juno I's launch of the Explorer 1 satellite was a huge success for the U.S. space program, only two of its remaining five flights were successful; launching Explorer 3 and 4. The American public was happy and relieved that America had finally managed to launch a satellite after the launch failures in the Vanguard and Viking series. With the relative success of the Juno I program, von Braun developed the Juno II, using a PGM-19 Jupiter first stage, rather than a Redstone.

Flight № Date / time ( UTC) Rocket,
Configuration
Launch site Payload Payload mass Orbit User Launch
outcome
1 January 31, 1958 Juno I LC-26A Explorer 1 22 kg LEO ABMA Success
Maiden launch of Juno I. First American satellite launched. Explorer 1 ceased transmission of data on May 23, 1958 when its batteries died, but remained in orbit for more than 12 years. It made a fiery reentry over the Pacific Ocean on March 31, 1970.
2 March 5, 1958 Juno I LC-26A Explorer 2 23 kg LEO ABMA Failure
Fourth stage did not ignite.
3 March 26, 1958 Juno I LC-5 Explorer 3 23 kg LEO ABMA Success
Down June 28, 1958.
4 July 26, 1958 Juno I LC-5 Explorer 4 29 kg LEO ABMA Success
Down October 23, 1959.
5 August 24, 1958 Juno I LC-5 Explorer 5 29 kg LEO ABMA Failure
Booster collided with second stage after separation, causing upper stage firing angle to be off.
6 October 23, 1958 Juno I LC-5 Beacon satellite 23 kg LEO ABMA Failure
Second stage separated prematurely from booster.

Gallery

Juno I carrying Explorer 3
Juno I with Explorer I mock-up at the Kennedy Space Center rocket garden

References

  1. ^ Bello, Francis (1959). "The Early Space Age". Fortune. Retrieved June 5, 2012.