# Celsius Information

https://en.wikipedia.org/wiki/Celsius

Celsius A thermometer calibrated in degrees Celsius
General information
Unit system SI derived unit
Unit ofTemperature
Symbol°C
Named after Anders Celsius
Conversions
x °C in ...... is equal to ...
K   x + 273.15
°F   (x × 9/5) + 32

The Celsius scale, also known as the centigrade scale,   is a temperature scale used by the International System of Units (SI). As an SI derived unit, it is used worldwide. In the United States,  the Bahamas, Belize, the Cayman Islands and Liberia however, Fahrenheit remains the preferred scale for everyday temperature measurement. It is named after the Swedish astronomer Anders Celsius (1701–1744), who developed a similar temperature scale. The degree Celsius (symbol: °C) can refer to a specific temperature on the Celsius scale or a unit to indicate a difference between two temperatures or an uncertainty. Before being renamed to honor Anders Celsius in 1948, the unit was called centigrade, from the Latin centum, which means 100, and gradus, which means steps.

From 1743, the Celsius scale is based on 0 °C for the freezing point of water and 100 °C for the boiling point of water at 1  atm pressure. Prior to 1743, the scale was also based on the boiling and melting points of water, but the values were reversed (i.e. the boiling point was at 0 degrees and the melting point was at 100 degrees). The 1743 scale reversal was proposed by Jean-Pierre Christin.

By international agreement, between 1954 and 2019 the unit degree Celsius and the Celsius scale were defined by absolute zero and the triple point of Vienna Standard Mean Ocean Water (VSMOW), a specially purified water. This definition also precisely related the Celsius scale to the Kelvin scale, which defines the SI base unit of thermodynamic temperature with symbol K. Absolute zero, the lowest temperature possible, is defined as being exactly 0 K and −273.15 °C. Until 19 May 2019, the temperature of the triple point of water was defined as exactly 273.16 K (0.01 °C).  This means that a temperature difference of one degree Celsius and that of one kelvin were exactly the same. 

On 20 May 2019, the kelvin, along with degree Celsius, was redefined so that its value is now determined by definition of the Boltzmann constant.

## History An illustration of Anders Celsius's original thermometer. Note the reversed scale, where 100 is the freezing point of water and 0 is its boiling point.

In 1742, Swedish astronomer Anders Celsius (1701–1744) created a temperature scale that was the reverse of the scale now known as "Celsius": 0 represented the boiling point of water, while 100 represented the freezing point of water.  In his paper Observations of two persistent degrees on a thermometer, he recounted his experiments showing that the melting point of ice is essentially unaffected by pressure. He also determined with remarkable precision how the boiling point of water varied as a function of atmospheric pressure. He proposed that the zero point of his temperature scale, being the boiling point, would be calibrated at the mean barometric pressure at mean sea level. This pressure is known as one standard atmosphere. The BIPM's 10th General Conference on Weights and Measures (CGPM) later defined one standard atmosphere to equal precisely 1,013,250 dynes per square centimetre (101.325  kPa). 

In 1743, the Lyonnais physicist Jean-Pierre Christin, permanent secretary of the Académie des sciences, belles-lettres et arts de Lyon [ fr], working independently of Celsius, developed a scale where zero represented the freezing point of water and 100 represented the boiling point of water.   On 19 May 1743 he published the design of a mercury thermometer, the "Thermometer of Lyon" built by the craftsman Pierre Casati that used this scale.   

In 1744, coincident with the death of Anders Celsius, the Swedish botanist Carl Linnaeus (1707–1778) reversed Celsius's scale.  His custom-made "linnaeus-thermometer", for use in his greenhouses, was made by Daniel Ekström, Sweden's leading maker of scientific instruments at the time, whose workshop was located in the basement of the Stockholm observatory. As often happened in this age before modern communications, numerous physicists, scientists, and instrument makers are credited with having independently developed this same scale;  among them were Pehr Elvius, the secretary of the Royal Swedish Academy of Sciences (which had an instrument workshop) and with whom Linnaeus had been corresponding; Daniel Ekström[[[SV]] [ sv]], the instrument maker; and Mårten Strömer (1707–1770) who had studied astronomy under Anders Celsius.

The first known Swedish document  reporting temperatures in this modern "forward" Celsius scale is the paper Hortus Upsaliensis dated 16 December 1745 that Linnaeus wrote to a student of his, Samuel Nauclér. In it, Linnaeus recounted the temperatures inside the orangery at the University of Uppsala Botanical Garden:

...since the caldarium (the hot part of the greenhouse) by the angle of the windows, merely from the rays of the sun, obtains such heat that the thermometer often reaches 30 degrees, although the keen gardener usually takes care not to let it rise to more than 20 to 25 degrees, and in winter not under 15 degrees...

Since the 19th century, the scientific and thermometry communities worldwide have used the phrase "centigrade scale".[ why?]Temperatures on the centigrade scale were often reported simply as degrees or, when greater specificity was desired, as degrees centigrade (symbol: °C). Because the term centigrade was also the Spanish and French language name for a unit of angular measurement (1/10000 of a right angle) and had a similar connotation in other languages, the term centesimal degree (known as the gradian, "grad" or "gon": 1ᵍ = 0.9°, 100ᵍ = 90°) was used when very precise, unambiguous language was required by international standards bodies such as the BIPM. More properly, what was defined as "centigrade" then would now be "hectograde".

To eliminate any confusion, the 9th CGPM and the CIPM ( Comité international des poids et mesures) formally adopted "degree Celsius" in 1948,  [a] formally keeping the recognized degree symbol, rather than adopting the gradian/centesimal degree symbol.

For scientific use, "Celsius" is the term usually used, with "centigrade" remaining in common but decreasing use, especially in informal contexts in English-speaking countries.  It was not until February 1985 that the weather forecasts issued by the BBC switched from "centigrade" to "Celsius". 

### Common temperatures

Some key temperatures relating the Celsius scale to other temperature scales are shown in the table below.

Key scale relations
Kelvin Celsius Fahrenheit
Absolute zero (exactly) 0 K −273.15 °C −459.67 °F
Boiling point of liquid nitrogen 77.4 K −195.8 °C  −320.4 °F
Sublimation point of dry ice 195.1 K −78 °C −108.4 °F
Intersection of Celsius and Fahrenheit scales 233.15 K −40 °C −40 °F
Melting point of H2O (purified ice)  273.1499 K −0.0001 °C 31.9998 °F
Normal human body temperature (average)  310.15 K 37.0 °C 98.6 °F
Water's boiling point at 1 atm (101.325 kPa)
(approximate: see Boiling point) [b]
373.1339 K 99.9839 °C 211.971 °F

## Name and symbol typesetting

The "degree Celsius" has been the only SI unit whose full unit name contains an uppercase letter since the SI base unit for temperature, the kelvin, became the proper name in 1967 replacing the term degrees Kelvin. The plural form is degrees Celsius. 

The general rule of the International Bureau of Weights and Measures (BIPM) is that the numerical value always precedes the unit, and a space is always used to separate the unit from the number, e.g. "30.2 °C" (not "30.2°C" or "30.2° C").  The only exceptions to this rule are for the unit symbols for degree, minute, and second for plane angle (°, ′, and ″, respectively), for which no space is left between the numerical value and the unit symbol.  Other languages, and various publishing houses, may follow different typographical rules.

### Unicode character

Unicode provides the Celsius symbol at code point U+2103 DEGREE CELSIUS. However, this is a compatibility character provided for roundtrip compatibility with legacy encodings. It easily allows correct rendering for vertically written East Asian scripts, such as Chinese. The Unicode standard explicitly discourages the use of this character: "In normal use, it is better to represent degrees Celsius "°C" with a sequence of U+00B0 ° DEGREE SIGN + U+0043 C LATIN CAPITAL LETTER C, rather than U+2103 DEGREE CELSIUS. For searching, treat these two sequences as identical." 

The canonical decomposition is simply an ordinary degree sign and "C", so some devices may simply display "°C" in its place due to Unicode normalization.

## Temperatures and intervals

The degree Celsius is subject to the same rules as the kelvin with regard to the use of its unit name and symbol. Thus, besides expressing specific temperatures along its scale (e.g. " Gallium melts at 29.7646 °C" and "The temperature outside is 23 degrees Celsius"), the degree Celsius is also suitable for expressing temperature intervals: differences between temperatures or their uncertainties (e.g. "The output of the heat exchanger is hotter by 40 degrees Celsius", and "Our standard uncertainty is ±3 °C").  Because of this dual usage, one must not rely upon the unit name or its symbol to denote that a quantity is a temperature interval; it must be unambiguous through context or explicit statement that the quantity is an interval. [c] This is sometimes solved by using the symbol °C (pronounced "degrees Celsius") for a temperature, and C° (pronounced "Celsius degrees") for a temperature interval, although this usage is non-standard.  Another way to express the same is "40°C ± 3 K", which can be commonly found in literature.

Celsius measurement follows an interval system but not a ratio system; and it follows a relative scale not an absolute scale. For example, 20 °C is not twice the heat energy of 10 °C; and 0 °C is not the lowest Celsius value. Thus, degrees Celsius is a useful interval measurement but does not possess the characteristics of ratio measures like weight or distance. 

## Coexistence of Kelvin and Celsius scales

In science and in engineering, the Celsius scale and the Kelvin scale are often used in combination in close contexts, e.g. "a measured value was 0.01023 °C with an uncertainty of 70 µK". This practice is permissible because the magnitude of the degree Celsius is equal to that of the kelvin. Notwithstanding the official endorsement provided by decision #3 of Resolution 3 of the 13th CGPM,  which stated "a temperature interval may also be expressed in degrees Celsius", the practice of simultaneously using both °C and K remains widespread throughout the scientific world as the use of SI-prefixed forms of the degree Celsius (such as "µ°C" or "microdegrees Celsius") to express a temperature interval has not been well-adopted.

## Melting and boiling points of water

One effect of defining the Celsius scale at the triple point of Vienna Standard Mean Ocean Water ( VSMOW, 273.16 K and 0.01 °C), and at absolute zero (0 K and −273.15 °C), was that neither the melting nor boiling point of water under one standard atmosphere (101.325 kPa) remains a defining point for the Celsius scale. In 1948 when the 9th General Conference on Weights and Measures ( CGPM) in Resolution 3 first considered using the triple point of water as a defining point, the triple point was so close to being 0.01 °C greater than water's known melting point, it was simply defined as precisely 0.01 °C.  However, current measurements show that the difference between the triple and melting points of VSMOW is actually very slightly (<0.001 °C) greater than 0.01 °C. Thus, the actual melting point of ice is very slightly (less than a thousandth of a degree) below 0 °C. Also, defining water's triple point at 273.16 K precisely defined the magnitude of each 1 °C increment in terms of the absolute thermodynamic temperature scale (referencing absolute zero). Now decoupled from the actual boiling point of water, the value "100 °C" is hotter than 0 °C – in absolute terms – by a factor of precisely 373.15/273.15 (approximately 36.61% thermodynamically hotter). When adhering strictly to the two-point definition for calibration, the boiling point of VSMOW under one standard atmosphere of pressure was actually 373.1339 K (99.9839 °C). When calibrated to ITS-90 (a calibration standard comprising many definition points and commonly used for high-precision instrumentation), the boiling point of VSMOW was slightly less, about 99.974 °C. 

This boiling-point difference of 16.1 millikelvins between the Celsius scale's original definition and the previous one (based on absolute zero and the triple point) has little practical meaning in common daily applications because water's boiling point is very sensitive to variations in barometric pressure. For example, an altitude change of only 28 cm (11 in) causes the boiling point to change by one millikelvin.

Celsius temperature conversion formulae
from Celsius to Celsius
Fahrenheit [°F] = [°C] × ​95 + 32 [°C] = ([°F] − 32) × ​59
Kelvin [K] = [°C] + 273.15 [°C] = [K] − 273.15
Rankine [°R] = ([°C] + 273.15) × ​95 [°C] = ([°R] − 491.67) × ​59
For temperature intervals rather than specific temperatures,
1 °C = 1 K = ​95 °F = ​95 °R
Comparisons among various temperature scales